Perflex Art Crystal Epoxy Resin Realizes Your Art Idea.
Factory Offer !
Payment & Shipping Terms:
Epoxy Pouring Adhesive P-128A/B
Perflex P-128A/B is high permeability epoxy pouring adhesive cured at room temperature. It has the advantages of good transparency, low viscosity, clean taste, environmental protection and mild curing process. After curing, it has high transparency, good hardness and excellent yellowing resistance.
Perflex P-128A/B can be used for the insulation sealing of wood crafts, decorative surface gum dropping, furniture and mould filling, and other electronic parts. It is especially suitable for filling with high thickness requirements such as river tables, tea trays and wooden furniture.
|Item||Base resin 128A||Hardener 128B|
|Appearance||clear liquid||clear liquid|
|Specific gravity 25℃||1.15±0.01||0.96±0.01|
|Mix proportion (weight ratio)||P128A :P128B = 3 :1|
|Condition of cure||60～70℃×2h or 80℃×1h|
|Flexural strength(unit: kg/mm2)||14|
|Tensile strength(unit: kg/mm2)||7|
|Water absorption 25℃/24h(unit:%)||＜0.1|
1-Group A was loaded with 15kg in 20L plastic barrel with large opening, and group B was loaded with 5kg in 5L plastic barrel.
2-When the product is stored in a dry and cool place away from light, the shelf life is 2 years.
1-Keep the bonding surface clean and dry, free of dust and grease.
2-Ensure to mix the 2-component adhesive by weight ratio, and stir well. Adjust the amount of mixture based on operation speed and ambient temperature.
3-When the relative humidity reaches over 80%, it is recommended to cure by adding heat rather than at room temperature.
4-If permitted, vacuum degassing before applying produces better results.
5-Excess adhesive can be cleaned off with a rag dipped with small amount of alcohol or acetone before fully curing.
6-Close the lid of the container well after use to minimize moisture entering into the container causing quality issue.
Changsha Perflex Novel Materials Corp.,Ltd
Mail: firstname.lastname@example.org | Tel/Whatsapp: + 86 136 7731 8230
Add:Baofeng Industrial Zone, Shashi County, Liuyang, Changsha City, Hunan China.